Online Issues

SRJ: Volume 14 No.1 June 2017
SRJ: Volume 13 No.2 December 2016
SRJ: Volume 13 No.1 June 2016
SRJ: Volume 12 No.2 December 2015
SRJ: Volume 12 No.1 June 2015
SRJ: Volume 11 No.2 December 2014
SRJ: Volume 11 No.1 June 2014
SRJ: Volume 10 No.2 December 2013
SRJ: Volume 10 No.1 June 2013
SRJ: Volume 9 No.2 December 2012
SRJ: Volume 9 No.1 June 2012
SRJ: Volume 8 No.2 December 2011
SRJ: Volume 8 No.1 June 2011
SRJ: Volume 7 No.2 December 2010
SRJ: Volume 7 No.1 June 2010
SRJ: Volume 6 No.2 December 2009
SRJ: Volume 6 No.1 June 2009
SRJ: Volume 5 No.2 December 2008
SRJ: Volume 5 No.1 June 2008
SRJ: Volume 4 No.2 December 2007
SRJ: Volume 4 No.1 June 2007
SRJ: Volume 3 No.2 December 2006
SRJ: Volume 3 No.1 June 2006

 

 

 

SRJ: Volume 14 No.1 June 2017

 

 

 

SRJ: Volume 13 No.2 December 2016

  • Analysis of Pandanus Extracts by Reversed Phase High Performance Liquid Chromatography
  • Vitex Species: Review on Phytochemistry and Pouch Design for Nutritional Benefits
  • Effect of Solar Radiation to the Building Materials Properties: A Review
  • Adopting Industrialisation in the Construction Environment: Meeting the Requirements of Sustainability
  • Physical and Mechanical Properties of Tenun Pahang Fabrics using Alternative Yarns
 

 

 

SRJ: Volume 13 No.1 June 2016

  • Substituent effect on corrosion inhibition of Schiff bases derived from isatin
  • The effect of oxalic acid as a doping agent on the conductivity of polyaniline
  • Climate change and freshwater availability: present and future challenges
  • Polyhydroxybutyrate for improved oil recovery: a literature review
  • Research trends of carbon dioxide capture using ionic liquids and aqueous amine-lonic liquids mixtures
  • Dye-sensitized solar cells using natural dyes extracted from plumeria and celosia cristata flowers
  • Revised normal ratio methods for imputation of missing rainfall data
  • The influence of Cr doped TiO² on the optical property and photocatalytic activity under sunlight irradiation
  • Developing multi-tier network design for effective energy consumption of cluster head selection in WSN
  • Effect of culture technique of Ganoderma australe mycelia on percentage removal of leachate organics
 

 

 

SRJ: Volume 12 No.2 December 2015

  • Synthesis and characterization of Pd(II) and Ni(II) complexes of schiff bases and catalytic activity of Pd(II) complexes
  • Conductivity studies of schiff base ligands derived from o-phenylenediamine and their Co(II) and Zn(II) complexes
  • Ionic conductivity studies on magnesium-based cellulose acetate polymer gel electrolytes
  • Vibrational analysis of Li₁₊ₓAlₓTi₂₋ₓ(P0₄)₃ (0.0 < x < 0.5) glass ceramic electrolytes prepared by acetic acid-assisted sol-gel method
  • The microstructure investigation of thionine-graphene nanocomposite using SEM
  • Kinetics study of membrane anaerobic system (MAS) in palm oil mill effluent (POME) treatment
  • Characterization of agarwood incense using gas chromatography – mass spectrometry (GC-MS) coupled with solid phase micro extraction (SPME) and gas chromatography - flame ionization detector (GC-FID)
  • Ionic conductivity of MG30-PEMA blend solid polymer electrolyte
 

 

 

SRJ: Volume 12 No.1 June 2015

  • Characterization of major allergens of local mud crab (Scylla serrata)
  • Effects of precipitation methods on the properties of protease extracted from starfruit (Averrhoa carambola L.) of different maturity index
  • Improving space-time-frequency MIMOOFDM with ICI self-cancellation scheme using least square error estimator
  • Research trends in microarray data analysis: modelling gene regulatory network by integrating transcription factors data
 

 

 

SRJ: Volume 11 No.2 December 2014

  • Characterization and purification of protease extracted from two maturity stages of ‘Noni’ (Morinda citrifolia L.) fruit
  • Enhancement of tensile strength of oil palm mesocarp fiber/poly(butylene succinate) biocomposite via superheated steam-alkali treatment of oil palm mesocarp fiber
  • Performance and Operational Characteristics of Modified Anaerobic Hybrid Baffled (MAHB) Reactor Treating Low Strength Recycled Paper Mill Effluent (RPME) wastewater
  • Synthesis and physicochemical analysis of Polystyrene-Anchored Pd(II) metal complex
  • The mechanical, thermal and morphological properties of graphene nanoplatelets filled poly(lactic acid)/epoxidized palm oil blends
  • Wear properties of paste boronized 316 stainless steel before and after shot blasting process
 

 

 

SRJ: Volume 11 No.1 June 2014

  • Application of partial least squares discriminant analysis for discrimination of palm oil
  • Applying the method of Lagrange Multipliers to derive an estimator for unsampled soil properties
  • Functional and antioxidant properties of angelwing clam (Pholas Orientalis) hydrolysate produced using alcalase
  • Properties of gliricidia wood (Gliricidia sepium) intercropped with cocoa (Theobroma cocoa) in Malaysia
 

 

 

SRJ: Volume 10 No.2 December 2013

  • Batch kinetics and effects of process parameters for biodegradation of Reactive Black 5 in an aerobic mixed microbial culture
  • Error Detection and Correction System (EDAC) of On Board Data Handling (OBDH) in real time operating system behaviour
  • Extraction and partial purification of protease from Bilimbi (Averrhoa bilimbi L.)
  • Simple modification measurement of photodegradability of polymers by using photo-induced chemiluminescence technique
 

 

 

SRJ: Volume 10 No.1 June 2013

  • An Overview of Mercury Emission Sources and Application of Activated Carbon for Mercury Removal from Flue Gas
  • Chemical Constituents of the Insecticidal Active Extract of Tinospora Crispa
  • Climate Change Affects Wetland Resources in Bangladesh: A Case Study on Hakaluki Haor
  • Effects of Extraction Time on The Functional Properties of Silver Catfish (Pangasius Sutchi) Skin Gelatin
  • The Effect of Sidewall Friction on Complex Channel Geometry using LABSWE
 

 

 

SRJ: Volume 9 No.2 December 2012

  • Spatial Autocorrelation in The Study of Neighbourhoods Towards Smart Cities: Empirical Evidence from Kerman, Iran
  • The Effect of Temperature on The Dispersion of Α-Mangostin in PNIPAM microgel System
  • Influence of Metakaolin as Partially Cement Replacement Minerals on The Properties of Cement and Concrete
  • Electrical Resistivity, Thermal Stability and Tensile Strength of Rice Husk Flour-Plastic Waste Composites
  • Saving Primary Energy Consumption Through Exergy Analysis of Combine Distillation and Power Plant
  • A Crystallographic Study of Bis[S-benzyl-5-bromo- 2-oxoindolin3-lidenemethanehydrazonthioate] Disulfide Solvated with Dimethylsulfoxide
 

 

 

SRJ: Volume 9 No.1 June 2012

  • Comparative Study on Mitogen Activated Protein Kinase of Plasmodium Species by Using in Silico Method
  • Digital Radiographic Image Enhancement for Weld Defect Detection Using Smoothing and Morphological Transformations
  • Extraction of Collagen from Catfish (Clarias Gariepnus) Waste and Determination of its Physico-Chemical Properties
  • Factors Affecting Molecular Self-Assembly and its Mechanism
  • Influence of Fresh and Thermoxidized Carotino Oil on Cyclic Guanosine Monophosphate (cGMP) in Erythrocytes from Sprague Dawley Rats
 

 

 

SRJ: Volume 8 No.2 December 2011

  • Electrical Resistivity and Flexural Strength of Plastic Composite Reinforced with Pineapple Leaf Particles
  • Removal of Cd2+ from Aqueous Solution Using MgAℓCO3-Layered Double Hydroxide
  • Neurotoxicity and Neuroprotective Effects of Polyimides (PI) and Polyphenylenevinylene (PPV) against Hydrogen Peroxide (H2O2)
  • Palm Olein Corrosion Inhibitor for Aluminium in HCl Solution
 

 

 

SRJ: Volume 8 No.1 June 2011

  • Geotechnical Synthesis of 2D-Electrical Resistivity Tomograhy of Geomaterial – Laboratory Model Study
  • Palm oil γ-tocotrienol and α-tocopherol Act as Potent Inducers in the Immune Response of Mouse Splenocytes in vitro
  • Three Dimensional CFD Simulations of Junction Temperature of Electronic Components using Nano-Silver
  • Preparation of Dipalmitin by Fractionation Method
 

 

 

SRJ: Volume 7 No.2 December 2010

  • Cu6 Sn5 and Cu3 Sn Intermetallics Study in the Sn-40Pb/Cu System During Long-term Aging
  • The Properties of Agricultural Waste Particle Composite Reinforced with Woven Cotton Fabric
  • Hyperelastic and Elastic-Plastic Approaches for Modelling Uniaxial Tensile Performance of Woven Fabrics
  • Effect of Particle Sizes, Wood to Cement Ratio and Chemical Additives on the Properties of Sesendok (Endospermum Oradenum) Cement-bonded Particleboard
  • Synthesis, Characterization and Biological Activity of NitrogenOxygen-Sulfur (NOS) Transition Metal Complexes Derived from Novel S-2,4-dichlorobenzyldithiocarbazate with 5-fluoroisatin
 

 

 

SRJ: Volume 7 No.1 June 2010

  • Effects of Particle Sizes, Resin Content and Board Densities on the Properties of Phenol Formaldehyde Particleboard from Oil Palm Trunk Particles
  • Seam Quality: Experimental and Modelling Works Using the Structural Equation Methodology
  • A Modified Integer Programming Model for Cleaning Service Scheduling
  • Response Surface Methodology as a Tool to Study the Removal of Amido Black Dye from Aqueous Solution Using Anionic Clay Hydrotalcite
  • Lipase Catalyzed Betulinic Acid Derivatives and its Cytotoxic Activity
 

 

 

SRJ: Volume 6 No.2 December 2009

  • Influence of Retrogression and Re-Aging Heat Treatment to Stress Corrosion Cracking Resistance on Al-Zn-Mg-Cu Alloy
  • Implementation of E-rental Housing Via Generic Notification Message Through Mobile Phone
  • Characterization of MPI Communication Primitives on a Heterogeneous Cluster
  • A Study of Climate Data Using Least Square Method and the Fast Fourier Transform
  • Design and Development of Universal Data Logger for Testing Vehicle Performance
 

 

 

SRJ: Volume 6 No.1 June 2009

  • Route Planner Mobile Web Application for UiTM Malaysia
  • Assessing the Line-By-Line Marking Performance of n_Gram String Similarity Method
  • The Tensile Evaluation of the Epoxy/Keratin Short Fibre as New Composites
  • Efficient Edge Detection Using Fuzzy Heuristic Particle Swarm Optimization
  • Solving Robot Path Planning Problem Using Ant Colony Optimisation (ACO) approach
 

 

 

SRJ: Volume 5 No.2 December 2008

  • Renewable Energy from Biogas Generated by Sewage Sludge – Relationship between Sludge Volume and Power Generated
  • Temperature Effects on Stripping Performance of Superpave Design Mix
  • Mechanical Properties of Rice Husk Ash as a Mineral Addition in Concrete
  • Arbitration in Construction Industry in Malaysia
  • Performance evaluation of AODV, DSR and DYMO Routing Protocol in MANET
 

 

 

SRJ: Volume 5 No.1 June 2008

  • Bending Behaviour of Dowelled Mortise and Tenon Joints in Kempas
  • Properties of Ternary Blended Cement Containing Metakaolin and Fly Ash
  • Fatigue Life Monitoring Program of RMAF MiG-29
  • Assessment of Soil Dispersibility Behaviour In-relation to Soil Internal Erosion Resistance
  • Consensus and Source Properties of Malaysian Aggregates for Superior Performing Asphalt Pavements
 

 

 

SRJ: Volume 4 No.2 December 2007

  • Study on Stability of a Novel Binder System Based on Palm Stearinin Metal Injection Moulding Application
  • Available transfer capability optimisation using evolutionary programming
  • Analysis on the Effect of Land Use Changes on Flooding Using SCS Method and GIS
  • Failure Analysis of Fiber Reinforced Composite Materials Used in Malaysian Industries
  • Potentiality of Banana (Musa) Stem as Raw Material in Chemical Nonwood Pulping
 

 

 

SRJ: Volume 4 No.1 June 2007

  • A study on the Problems of the Usage of Incinerators in Malaysia
  • Design and Performance of Pre-Stressed Concrete Railway Sleepers Containing Fibers
  • The Effect of Butt Joint on the Structural Behaviour of PSSDB Wall Panel
  • Low Flow Analysis for Drought Management
  • Identification of Bacterial Strains Capable of Degrading Malaysian Petroleum Sludge
 

 

 

SRJ: Volume 3 No.2 December 2006

  • Development of an Automated Biaxial Solar Photovoltaic Tracking System
  • Bending and Bonding Properties of Sandwiched Polymer Concrete Composites
  • Ergonomics Analysis of Muscle Activity of Workers in a Metal Stamping Industry
  • Optimisation of Calcium Silicate and Sand Cement Bricks in Masonary Bearing Walls
  • Exfiltration from Sewers: Effects of Different Types of Leakage
 

 

 

SRJ: Volume 3 No.1 June 2006

  • Temperature Measurement System for Building Material and Built Space Thermal Evaluation
  • Application of Artificial Neural Network for Automatic Contingency Analysis in Power Security Assessment
  • Design and Testing of an Experimental IPv4-to-IPv6 Transition Network
  • Furnace Modelling Using State Space Representation
  • Shear Capacity of Singly and Doubly Webbed Corrugated Web Girder